It's everything you love about an Ikelite DSLR Housing, shrunk down into a perfectly-sized package for travel.
Ikelite Housings for Olympus Micro Four-Thirds
The True TTL Advantage. TTL or "Through-The-Lens" flash metering means the camera controls flash duration to properly expose an image. A direct electrical (non-fiber optic) connection to the flash tells your camera that a TTL external flash is attached, allowing the camera to adjust exposure more accurately than with slave TTL strobes.
Fiber optic slave flash units require the camera's flash to fire every time. This creates a shutter lag as you wait for the camera's flash to recycle in between shots, drains your camera's battery life, and builds up heat inside of the housing. Ikelite electronics translate direct electrical impulses from your camera, triggering your strobe and precisely adjusting its power without the need to fire the camera's flash. This eliminates the slave TTL strobe issues of signal interference, inconsistent exposure due to weak fiber optic transmission and false triggering caused by light rays bouncing off the water's surface or your buddy's flash going off.
The camera's built-in flash is not usable in this installation. Non-Ikelite strobes may be attached with the appropriate sync cord and operate non-TTL (manual exposure modes only) with this housing.
An interchangeable lens camera demands a housing with interchangeable lens ports. It couldn't be more simple to change ports than this system—just press the port on and tighten three thumb screws. Feel positive reinforcement that the port is secure without any complex moving parts that can jam or break in a remote location. Plus, Ikelite’s signature zoom sleeves are the lightest, most affordable, and easiest to assemble out there!
This housing accepts a variety of ports to accommodate zoom, macro, and wide angle lenses from Olympus and Panasonic. Lens port and zoom sleeves sold separately.
The camera's large, super-bright LCD screen is viewable edge-to-edge through the back of the housing. A built-in magnifying viewfinder includes specially optics to provides a clear view of the camera's EVF when wearing a dive mask.
Controls are put right at your fingertips for all important camera functions. Control symbols laser engraved into the back of the housing will never peel off or fade even with years of use.
With a system of this caliber, a tray with handle is essential for the attachment of lighting and comfortable handling in a wide variety of shooting scenarios. This housing includes a balanced aluminum tray with our signature quick release handle for easy attachment and removal of strobes and video lights. This unique handle is curved slightly to fit the nature curvature of your hand, and features a soft over-mold which makes it a delight to hold. The complete tray and handle detaches with the removal of two nuts for packing or to attach the optional Tray with Dual Handles.
Special polycarbonate blends provide for an extremely strong yet clear and lightweight enclosure. There's no substitute for inspecting the actual o-ring seal once your housing is closed. Ikelite's signature clear construction lets you see that the housing is watertight and dry before you enter the water, and provides full view of the camera while you're diving. Unlike aluminum, polycarbonate is fundamentally corrosion-resistant for easy maintenance year after year.
This housing requires the addition of a compatible lens port for waterproof operation. Lens port not included.
Housing for Olympus OM-D E-M10
Product number 6950.10
Housing for Olympus PEN E-PL7
Product number 6951.07